Suppliers Of Corrosion Inhibitor

Manufacturer of a wide range of products which include corrosion inhibitor.

Corrosion Inhibitor

Approx. Rs 55 / Kilogram(s)

Get Best Quote





EVERCURE-RP9213 is a cold dip process, which prevents the components from Rusting.


  1. EVERCURE-RP9213 protects Iron and Steel against rusting in between process.
  2. EVERCURE-RP9213 is easy to operate and is controlled by simple test requiring no special chemical knowledge. No fumes or odor are given off.


Bath parameters


1. Concentration : 5 Kgs of EVERCURE-RP9213 for every 100 ltrs of working volume.


2. Chemical Strength : 4 – 6 points


3. Immersion time : 1-5 Minutes


4. Temperature : Ambient




1. Partially fill the tank with water and add 5 kgs of EVERCURE-RP9213 for every 100 ltrs of bath.

2. Fill the bath up to its operating level with water and stir the solution thoroughly.

Bath control


EVERCURE-RP9213 concentration can be determined can be determined more accurately by situation method.


a) Take 1 ml of Evercure bath solution into a conical flask.

b) Add 5 ml of sulphuric acid.

c) Titrate against N/10 potassium permanganate standard solution.


End point: Colorless to Pink


No. Of. Ml of N/10 Potassium Permanganate required = points.






Add 200 gms of EVERCURE-RP9213 per 100 ltrs of bath for each point below

4 Points.


Following points to be kept to discard the tank solution


Discard the bath when the contaminants reach higher level.


Handling precautions


Clothing should be protected if there is any possibility of continuous or frequent splashing with the solution. Wash off any splashes on the skin at once with cold water. If the solution gets in the eyes, wash out with liberal quantities of water and obtain immediate medical attention.


Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Port of Dispatch: chennai

Production Capacity: 500 tons per day

Yes! I am interested


Explore More Products