Acid Inhibitor

Product Details:

EVERLITE – 12 is an additive to Hydrochloric acid mixture bath to completely eliminate mist spray, and corrosion inhibition. The addition of EVERLITE – 12 does not in any way affect the behavior of the acid solution. It will increase the purpose of cleaning of acid.

Direction for using everlite -12:

• The following is the recommended concentration
• 250ml of EVERLITE – 12 in 1000Ltrs of acid bath solution results initially in the formation of certain amount of froth. It is recommended that the required quantity is added in parts. As far each addition the solution should be stirred until fully dissolved and then the next addition made.

• For economy and efficient operation, regular small addition should be made rather than a large single addition of the amount of foam visible is less than the normal the indication is that the concentration of EVERLITE – 12 is less than optimum thus requiring an addition.

Replenishment:

• 250 ml should be added for 330 litres of HCL addition.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: chennai

Production Capacity: 500 tons per day

Product Details:

• Corrosion inhibitor for sulphuric acid pickling bath.
• Corrosion inhibitor for hydrochloric acid pickling bath.
• Corrosion inhibitors for phosphoric acid pickling bath.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Port of Dispatch: Chennai

Production Capacity: 500 tons per day

Product Details:

Product:

• EVERCURE-RP9213 is a cold dip process, which prevents the components from Rusting.

• EVERCURE-RP9213 protects Iron and Steel against rusting in between process.
• EVERCURE-RP9213 is easy to operate and is controlled by simple test requiring no special chemical knowledge. No fumes or odor are given off.

Bath make up:

• Partially fill the tank with water and add 5 kgs of EVERCURE-RP9213 for every 100 ltrs of bath.
• Fill the bath up to its operating level with water and stir the solution thoroughly.

EVERCURE-RP9213 concentration can be determined can be determined more accurately by situation method.

• Take 1 ml of Evercure bath solution into a conical flask.
• Add 5 ml of sulphuric acid.
• Titrate against N/10 potassium permanganate standard solution.
• No. Of. Ml of N/10 Potassium Permanganate required = points.

• Add 200 gms of EVERCURE-RP9213 per 100 ltrs of bath for each point below
• 4 Points.
• Following points to be kept to discard the tank solution
• Discard the bath when the contaminants reach higher level.

Handling precautions:

• Clothing should be protected if there is any possibility of continuous or frequent splashing with the solution. Wash off any splashes on the skin at once with cold water. If the solution gets in the eyes, wash out with liberal quantities of water and obtain immediate medical attention.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: chennai

Production Capacity: 500 tons per day