Wire Drawing Lubricants

Product Details:

EVERLUBE–WL620 is a powdered chemical which is readily soluble is warm water and is used to produces a drawing lubricant bath that tightly adheres to phosphate coated surface. Everlube WL620 bath is applied by a simple immersion of flow-coat operation. 

The lubricity obtained by the combination of the phosphate – Everlube coating results in maximum production with minimum rejects on such typical, difficult, cold-working operation as tube drawing, bumper forming, deep drawing, necking, noising, up setting,

 and wire drawing.

After the work has been phosphate coated with Phosphating solution and thoroughly rinsed it is immersed in a hot solution of EVERLUBE-WL620 when the work is with drawn from the EVERLUBE-WL620 bath, a thin, hard lubricant film remains after the water has evaporated.

The dried phosphate–Everlube-WL620 film also protects the work from rusting during in-process storage and re-absorption of moisture, minimizes chattering during drawing.

CONCENTRATION             :           3-15% (3 to 15 Kgs per 100 liters of water)

TEMPERATURE                   :           75°-80° C

DIP TIME                               :           7 –10 mts

FREE ACID                           :           0  to 1 points

PH                                           :           9.4 – 9.7

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: CHENNAI

Production Capacity: 500 tons per day